Careers

We are looking for Assembly Line Auditors (also known as Line Checkers) for 3rd shift (11:00 pm – 7:00 am) in our Broken Arrow and Owasso facilities. The Owasso plant is just Northeast of Hwy 75 and 66th St North in Tulsa.

Job duties

• Pulls samples from each press during production and evaluates for quality defects.
• Reviews job travelers, drawings, control plans and other documents for product requirements.
• Communicates the details of the results of sample inspections.

The line checker job requires use of various tools including microscope, magnifying glass, calipers, micrometers, leak test units, tweezers and scissors.

Qualifications

• Ability to communicate information clearly and effectively to various individuals within the facility
• Strong attention to detail
• Strong aptitude for math and computer data entry
• Experience in manufacturing inspection preferred.

You may also apply in person at either OK facility:

• 6712 N. Canton Ave Tulsa
• 601 N. Poplar Ave. Broken Arrow

Da/Pro Rubber participates in E-Verify and conducts pre-employment drug testing.

We are seeking a Mold Set-Up Technician for our Liquid Injection Molding / Liquid Silicone Molding (LIM) department in our Owasso facility.

Job Summary

Sets up and/or tends to molds for press machines based on job documents and production needs. Performs sample runs before releasing to the press operator. Inspects and cleans mold before and after production runs.

Job Duties

• Perform all operations and functions for liquid injection presses including the tooling and support of equipment
• Read job documents to determine molding specifications and tooling instructions
• Pull required mold(s) from storage
• Inspect mold(s) for defects and cleanliness
• Mount, install, & align mold and/or other work pieces on to press manually or by using hoist
• Secure molds and/or other work pieces using basic hand and/or power tools
• Conduct tests and inspect mold to ensure mold is secure and verifies part quality
• Create Standard Operating Procedures and Work Instructions as needed
• Apply LEAN Methodology and drive continual improvement of processes and product quality
• Work closely with Engineering and Maintenance to improve tooling and equipment uptime
• Train others as needed

Required Qualifications

• Ability to communicate effectively verbally and in writing to all levels of employees
• Previous experience in a tight tolerance, high quality product manufacturing environment
• Intermediate ability in using computers, data entry and MS Office products
• Ability to use basic hand tools and power tools; mechanical aptitude

Preferred Qualifications

• Experience in the plastics and/or rubber industry
• At least 5 years of experience as a press machine operator
• At least 1 year of experience as a machine set-up tech with demonstrated critical thinking and problem solving skills

You may also apply in person at 6712 N Canton Ave.  Tulsa, OK

Da/Pro Rubber participates in E-Verify and conducts pre-employment drug testing.

We are looking for an Inspection Machine Operators for our North Tulsa / Owasso, OK production facility on 3rd shift (11:00 pm – 7:00 am)

The Automatic Inspection Machine is a piece of equipment that uses a camera and computer to visually inspect and measure the components that are manufactured, automatically sorting out parts that don’t meet specifications. The Automatic Inspection Machine Operator monitors the machine to make sure it’s running smoothly. Retention Bonus of $250 Available at 60 days and 6 months!

Job Duties

The Inspection Machine Operator:

• Monitors machine for jams
• Monitors how the inspection machine is running by attending alarms
• Verifies why the alarm sounds by observing the monitors on machines
• Documents part counts and quantities of rejects then enters information on the machine
• Completes random inspections of part quality off-machine
• Cleans machine at the end of the shift

No experience necessary. We will train.

Individual must have a strong aptitude for math and computer data entry. The ideal candidate is a problem solver who can work independently with limited supervision.

You may also apply in person at either OK facility:

• 6712 N. Canton Ave Tulsa
• 601 N. Poplar Ave. Broken Arrow

Da/Pro Rubber participates in E-Verify and conducts pre-employment drug testing.

Job Summary

The Mill Operator sets up, operates and tends milling machines to mix, mill and shape rubber material for molding. The mill operator uses job travelers and other documentation for specifications and conformance. This position is an entry level position with training provided, no experience necessary.

Experience in a manufacturing environment is helpful but if you have experience as a reliable worker willing to help out the team, we will train you.

Primary Responsibilities

The Mill Operator:

• Reads and interprets job documents for mixing and material instructions needed to mill rubber components;
• Observes the milling machine operation and adjusts controls to ensure conformance with specified tolerances such as mill speed, lubrication and density;
• Continuously tends the machine and the material, feeding material back into the rollers and sometimes adding components until the material reaches proper consistency;
• Verifies dimensions of rubber material using various instruments such as rulers, gauges and calipers;
• Delivers samples to the on-site lab for testing, as necessary;
• Removes rubber material and places it according to instructions on racks in the mill room or cold storage;

Job Requirements

• High school diploma or equivalent preferred;
• 2 years of experience working with heavy machinery in a manufacturing environment preferred;
• Experience with data entry of job information into the computer;
• The Mill Operator must be able to lift, push and pull up to 60 pounds, stand continuously, tolerate a non-controlled temperature environment, and interpret and communicate detailed instructions and measurements.

The shift hours for this position are:

1st shift 5:00 am – 1:00 pm, Monday – Friday

2nd shift 2:00 pm – 10:00 pm, Monday – Friday

You may also apply in person at 601 N Poplar Ave., Broken Arrow, OK

Da/Pro participates in E-Verify and conducts pre-employment drug testing.

We are searching for an experienced machinist to become part of our mold making team. The ideal candidate is a self-motivated individual who knows their way around a tool shop, is able to read and accurately interpret prints and specifications and is able to work as a team player with minimal supervision. In addition to advanced technical skill, the successful employee will have experience that enables them to understand the tool design and redesign needs of our customers and to be able to provide input as the job evolves.

Job Responsibilities

• Studying blueprints, sketches, electronic drawings, solid files, manuals or other specifications to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements;
• Setting up and operating CNC/NC, special-purpose, and EDM machines and machining centers to manufacture, repair, maintain, and improve injection molds, jigs, and fixtures;
• Verifying conformance of finished work piece to specifications, using various precision measuring instruments;
• Completing work on entire projects or on any of the many sub-tasks of projects with results positively contributing to project completion;
• Assisting the Plant Manager with various supervision duties within the Tooling Department.

Minimum Requirements

• Experience with performing (not just the ability to perform) the job responsibilities listed above.
• Experience using MasterCam, preferably MasterCam 2019.
• At least five years of experience working as a machinist making precision tools such as molds, fixtures & jigs.
• Ability to manage multiple customer deadlines while prioritizing day-to-day issues as they arise. This includes the ability to estimate and manage time required to complete a job.
• Knowledge of SolidWorks preferred.
• Supervision experience preferred.

We are searching for a Liquid Injection Molding (LIM) Supervisor in our Oklahoma facility just outside of Owasso in North Tulsa. This position oversees the production of LSR (liquid silicone rubber) parts according to company and customer specifications as detailed in blueprints, layouts and templates. This individual plans and facilitates the schedule of equipment, material and people to meet production demands.

Our ideal candidate is an experienced technical expert in LSR or plastics molding in a tight-tolerance production environment who can problem solve and work alongside operators, running the floor with little supervision. Relevant experience as a molding machine operator is required. Supervision experience is a bonus but not required if you’re open to coaching. The appreciation of quality, continuous learning and teamwork are a must. We are looking for a long-term committed employee who wishes to grow with the company so training is available for someone interested in becoming an expert in LSR manufacturing.

Responsibilities Include:

• Supervising and coordinating the activities of operators engaged in the production of LSR parts;
• Setting up silicone injection tools on molding machines;
• Training operators and coaching professional workplace behavior;
• Participating in production team meetings discussing schedules and process efficiencies;

Minimum Qualifications:

• At least five years of experience working with liquid silicone or plastic (silicone preferred) injection molding machines in a tight-tolerance production environment.
• High school diploma or equivalent
• Intermediate level math and computer proficiency and ability to read and understand blueprints and technical drawings
• Ability to communicate clearly verbally and in writing with others in various areas of the company
• Supervision experience preferred

Physical requirements include the ability to stand for long periods of time and lift up to 50 pounds.

You may also apply in person at either OK facility:

• 6712 N. Canton Ave Tulsa
• 601 N. Poplar Ave. Broken Arrow

Da/Pro participates in E-Verify and conducts pre-employment drug testing.

Job Summary

The Director of Quality Assurance (QA Director) oversees the quality control operations of the plant in conformance with Da/Pro standards, policies and procedures. This position supervises quality personnel including QA technicians and line check personnel and is the QA management representative for the facility. This individual works closely with other plant and company functions in the support and promotion of the company’s culture and core values.

The ideal candidate will have significant experience overseeing and directing quality in an ISO 13485 environment.

Responsibilities and Duties

• Plans, coordinates, and directs quality control program across multiple locations designed to ensure continuous production of products consistent with established standards;
• Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product;
• Maintains quality control objectives and in cooperation with the plant managers, coordinates objectives with production procedures to maximize product reliability and minimize costs;
• Directs, through intermediate personnel, workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products;
• Plans, promotes, and organizes training activities related to product quality and reliability;
• Investigates and addresses customer complaints regarding quality;
• Plans and executes internal audits and acts as liaison with external auditors.

Qualifications and Skills

• Five to Eight years of experience as a Quality Manager in a manufacturing environment
• Experience with ISO 9001 and ISO 13485 quality standards
• At least 4 years of supervisory/management experience.

Salary commensurate with experience and qualifications.

Job Summary

The Press Machine Operator is responsible for operating and tending to the press machines to mold, shape and form rubber components. The ideal candidate is responsible, dedicated and hard-working. Experience in a manufacturing environment is preferred.

Wage increases available after 30 days and 6 months for strong work performance. $250 Retention Bonus available for 2nd & 3rd shifts.

Responsibilities and Duties

• Review job documents for details and instructions to determine procedures and settings for pressing rubber components
• Load rubber components on to molds
• Monitor press machine operation and observe lights and gauges in order to detect press machine malfunctions
• Notify supervisors when rubber component and or molds don’t meet standards
• Provide the quality inspector with sample of finished product and make adjustments to mold as recommended by the production supervisor
• Clean excess product from press machine molds as needed, using various tools such air hoses and solutions such as soap with water

Qualifications and Skills

• Ability to understand instructions and to convey information to others effectively
• Basic reading, writing and math skills
• Basic computer skills to enter data from processed orders
• Must be able to use basic hand tools

• Individuals in this machine operator position stand for long periods of time, perform some moderate lifting and must be able to push/pull.

Da/Pro participates in E-verify and conducts pre-employment drug screenings.

Job Summary

The Press Machine Operator is responsible for operating and tending to the press machines to mold, shape and form rubber components. The ideal candidate is responsible, dedicated and hard-working. Experience in a manufacturing environment is preferred.

Wage increases available after 30 days and 6 months for strong work performance. $250 Retention Bonus available for 2nd & 3rd shifts.

Responsibilities and Duties

• Review job documents for details and instructions to determine procedures and settings for pressing rubber components
• Load rubber components on to molds
• Monitor press machine operation and observe lights and gauges in order to detect press machine malfunctions
• Notify supervisors when rubber component and or molds don’t meet standards
• Provide the quality inspector with sample of finished product and make adjustments to mold as recommended by the production supervisor
• Clean excess product from press machine molds as needed, using various tools such air hoses and solutions such as soap with water

Qualifications and Skills

• Ability to understand instructions and to convey information to others effectively
• Basic reading, writing and math skills
• Basic computer skills to enter data from processed orders
• Must be able to use basic hand tools

• Individuals in this machine operator position stand for long periods of time, perform some moderate lifting and must be able to push/pull.

Da/Pro participates in E-verify and conducts pre-employment drug screenings.

Job Summary

The Product Inspector is responsible for inspecting, sorting and weighing manufactured rubber components in various shapes and sizes. Uses microscope, magnifying glass and various other hand tools such as tweezers, scissors and q-tips. Wage increases available after 30 days and 6 months for strong work performance.

We are hiring Product Inspectors for the following shifts in our Broken Arrow, OK facility:

3rd shift (11:00pm – 7:00am) Sunday – Thursday

Duties & Essential Job Functions

• Inspect manufactured products for conformance to specifications
• Separate components with defects including but not limited to cracks, marks, holes, tears and contamination
• Notify supervisor of excessive defects on any particular component
• Document accepted/rejected counts on product paperwork

Other Needs & Requirements

• Speak to others to convey information effectively
• Use logic and reasoning to identify alternative solutions to problems
• Other duties as assigned

Qualifications:

• Must be able to accurately weigh, count and document inspection results
• Some experience entering data into a computer required
• Strong attention to detail

Da/Pro participates in E-Verify and conducts pre-employment drug testing.

Responsibilities and Duties

The essential job duties of the Machine Operator/Inspector include:

• Manual operation of injection molding machines according to specific manufacturing document instructions;
• Recording molded part quantities on the job traveler and into the job tracking system;
• Reporting of any quality or mechanical issues;
• Inspection of parts for defects or non-conformance and any associated documentation;
• Weighing production batches to obtain quantities;
• Documentation as part of our quality assurance best practices.

Qualifications and Skills

The individual in the Machine Operator/Inspector position:

• Has the ability to read and understand manufacturing documents;
• Has good basic math and calculation understanding;
• Can use logic and reasoning to identify alternative solutions to problems;
• Is a hard-working, reliable person with a solid work history; and
• Can work overtime, as needed.

Ideally, this individual can work 7:00 am to 3:30 pm Monday through Friday.

Benefits

Da/Pro Rubber offers a competitive salary, health, dental and vision insurance and 401k.

Job Summary

The Product Inspector is responsible for inspecting, sorting and weighing manufactured rubber components in various shapes and sizes. Uses microscope, magnifying glass and various other hand tools such as tweezers, scissors and q-tips. Wage increases available after 30 days and 6 months for strong work performance.

We are hiring Product Inspectors for the following shifts in our Owasso, OK facility:

2nd shift (3:00pm – 11:00pm) Monday – Friday

3rd shift (11:00pm – 7:00am) Sunday – Thursday

Duties & Essential Job Functions

• Inspect manufactured products for conformance to specifications
• Separate components with defects including but not limited to cracks, marks, holes, tears and contamination
• Notify supervisor of excessive defects on any particular component
• Document accepted/rejected counts on product paperwork

Other Needs & Requirements

• Speak to others to convey information effectively
• Use logic and reasoning to identify alternative solutions to problems
• Other duties as assigned

Qualifications:

• Must be able to accurately weigh, count and document inspection results
• Some experience entering data into a computer required
• Strong attention to detail

Da/Pro participates in E-Verify and conducts pre-employment drug testing.